3V Coin Cell Battery Holder and Switch for LEDs

4.20 NZD
Coin Cell Battery Holder and Switch Unit for 3V LEDs

This 3V battery holder will power all of our 3V LEDs. Uses 1 coin cell battery to power 1-10 LEDs. If your project requires more LEDs, you may like the larger AA battery holder and switch unit, which powers up to 60 LEDs.

This unit works well when your project is very small and/or portable. 

10 chip-size LEDs will run for about 12 hours. 3 chip-size LEDs will run on a single battery for about 40 hours. 

Connects to LEDs using the included shrink tubes. No soldering is needed.

Includes:

  • on/off switch
  • 2032 coin cell battery
  • shrink tubes for covering the connections
  • instructions

how to connect LEDs to a battery holder

Download a FREE LED wiring tutorial

Connecting the LEDs

  1. Twist the red wire from the switch to all of the red wires on your LEDs; use shrink tube or electrical tape to protect the connection.
  2. Twist the black wire from the switch to all of the green wires on your LEDs; cover the connection with shrink tube or electrical tape.
  3. Insert the coin cell battery (included) into the holder.
  4. Turn on the switch and enjoy!

The white switch allows you to easily turn off the lights without disconnecting the battery. The battery can run up to 10 3V LED lights for about 12 hours. 3 lights will light for about 40 hours. The battery is changeable.

This set will work with ALL of the LEDs from True2Scale.

You may wish to use wired connectors to extend the length of the wires from the battery holder and switch unit to the LEDs.

International Shipping

Some countries do not allow packages containing lithium batteries. If your order is to be shipped outside of the United States, it is up to you to find out if your country will allow packages containing lithium batteries. If your country does not allow these items, we can remove the battery from your package before shipping. Please contact us or write a note during the checkout process.

Dimensions of the battery holder and wires 

The wires on the battery holder are 4" long. You may wish to use wired connectors to extend the length of the wires from the battery holder and switch unit to the LEDs.

The battery holder is 15/16" (24mm) at the widest area. Length: 3/4" (19mm) Depth 7/32" (6mm)


COMPARISON OF 3V POWER SUPPLIES
   

max. number of LEDs powered

on/off switch power source dimensions
coin-cell-battery-holder2.jpg 3V COIN CELL BATTERY HOLDER 10 Yes 2032 battery 15/16" (24mm) at the widest area. Length: 3/4" (19mm) Depth 7/32" (6mm)
 aa-battery-holder.jpg 3V AA BATTERY HOLDER 60 Yes 2 AA batteries 1.27" (3.2cm)w x 2.3" (5.8cm)t x 0.6" (1.5cm)d
3v-wall-adapter-with-switch2.jpg  3V DC REGULATED WALL ADAPTER 50 Optional wall outlet The length of the wire is 57" (145cm). The switch is 6" (15.2cm) from the barrel plug. The wires from the jack are 6" (15.2cm) long.